OAR 632-010-0010
Application and Permit to Drill, Redrill, Deepen, Alter Casing, or Rework


(1)

No person may construct, drill, operate, or decommission a well until the person has received a permit, paid to the department a nonrefundable fee for each such well pursuant to ORS 520.017 (Fees), and posted a bond or other financial security pursuant to OAR 632-010-0205 (Drilling Surety Bond). Construction includes construction of access roads, well pads and other site disturbances relating to the development of the site. Drilling includes redrilling, deepening, and drilling to set conductor pipe. Operation includes maintaining the well while in use or while production is suspended. Decommissioning includes plugging and restoration of the well site.

(2)

The application for a permit must include:

(a)

The location of the well;

(b)

The name and address of the surface owner, operator, permittee and any other person responsible for the conduct of the drilling operations;

(c)

The elevation of the well above sea level;

(d)

Casing and cementing programs giving details of casing sizes, casing grade, hole diameters, and volume of cement to be used;

(e)

Geologic objectives for wells proposed for known producing areas and proposed depth in all cases; and

(f)

Documentation of the ownership of mineral rights or a mineral rights lease on the property to be drilled, or the right or obligation, under the terms of an existing contract, to drill a well.

(3)

The permit will be suspended if the applicable rights in subsection (2)(f) of this rule cease to exist prior to the decommissioning of the well, access roads and any related disturbance.

(4)

If a completed application has not been received by one year from the date of the receipt of the initial application, the application will be automatically returned to the applicant and will be deemed withdrawn.

(5)

The applicant must be registered with the Secretary of State if registration is required by the laws of the State of Oregon.

(6)

Upon receipt of an application the department will determine within 21 days if the application is complete. The department will notify the applicant of the determination in writing.

(7)

Intentionally left blank —Ed.

(a)

The department will circulate each application for a permit to drill for technical review to appropriate state agencies and the governing body of the county or city in which the well will be located. The agencies and governing body have 45 days from the date the department circulates the application in which to comment. The department can extend this period upon request by the reviewing agency for good cause. Within 60 days after receipt of a complete application for a permit, the department shall issue or deny the permit unless the department determines that a longer period is necessary to respond to comments or new information, or for any other good cause.

(b)

The department may approve immediately without circulating for technical review an application for a permit to redrill, deepen, or rework if the drilling operations are an uninterrupted continuance of previous drilling operations, provided conditions of OAR 632-010-0142 (Directional Drilling)(3) are met.

(8)

Intentionally left blank —Ed.

(a)

The application for permit must be denied if the applicant is currently in violation of ORS 520 or with the rules in this division with respect to another well. A permit may also be denied if:

(A)

The permittee has unlawfully abandoned a well or failed to submit records or samples in a timely manner; or
(B)If the applicant controls or is controlled by a person that has been determined by the department to be in violation of ORS chapter 520 or the rules in this division or has unlawfully abandoned a well or failed to submit records or samples in a timely manner.

(b)

If the department refuses to issue a permit, it will notify the applicant and concurrently provide the reason for denying the permit. A person adversely affected by refusal to issue a permit may seek review of the decision by filing an appeal with the board within 30 days of the date the notice of the refusal to issue the permit is received by the applicant.

(9)

When issuing the permit, the department shall inform the applicant that:

(a)

Issuance of the permit is not a finding of compliance with the Statewide Planning Goals (ORS 197.225 (Preparation)) or compatibility with the acknowledged comprehensive plan and land use regulations; and

(b)

The applicant must receive land use approval from the affected local government supported by written findings as provided in OAR 632-001-0015 (State Agency Coordination Program) before the use can commence.

(10)

The department may temporarily suspend operations if they are not in compliance with applicable laws or rules of this chapter, or departmental orders.

(11)

The department may revoke a permit for noncompliance with applicable statutes, rules, orders, and permit conditions.

Source: Rule 632-010-0010 — Application and Permit to Drill, Redrill, Deepen, Alter Casing, or Rework, https://secure.­sos.­state.­or.­us/oard/view.­action?ruleNumber=632-010-0010.

632‑010‑0002
General Rules
632‑010‑0004
Supremacy of Special Rules
632‑010‑0008
Definitions
632‑010‑0010
Application and Permit to Drill, Redrill, Deepen, Alter Casing, or Rework
632‑010‑0011
Active Permits
632‑010‑0012
Modifications to Drilling Permits
632‑010‑0014
Drilling Practices
632‑010‑0015
Down Hole Loss and Decommissioning of a Radioactive Source
632‑010‑0016
Enclosure and Identification of Wells, Tanks, and Other Oil Measuring Devices
632‑010‑0017
Well Records (Logs)
632‑010‑0018
Organization Reports
632‑010‑0020
Surface Equipment
632‑010‑0128
Boiler or Light Plant
632‑010‑0130
Rubbish or Debris
632‑010‑0132
Tubing
632‑010‑0134
Chokes
632‑010‑0136
Separators
632‑010‑0138
Fire Walls
632‑010‑0140
Reserve Pits, Sumps, and Above-Ground Tanks
632‑010‑0142
Directional Drilling
632‑010‑0144
Report of Perforating or Well Stimulation Treatment
632‑010‑0146
Vacuum Pumps Prohibited
632‑010‑0148
Production Practice
632‑010‑0150
Removal Of Casing
632‑010‑0151
Notification of Fire, Breaks, Leaks, or Blowouts
632‑010‑0152
Multiple Completion of Wells
632‑010‑0154
Determining and Naming Fields and Pools
632‑010‑0156
Spacing Units, Notification
632‑010‑0157
Exceptions to Special Rules
632‑010‑0159
Underground Reservoirs for Natural Gas Storage
632‑010‑0161
Compulsory Integration Orders
632‑010‑0162
Illegal Production
632‑010‑0163
Limitation of Production
632‑010‑0164
Commingling of Production Prohibited
632‑010‑0165
Allocation of Gas Pursuant to Special Pool Rules
632‑010‑0166
Reports by Purchasers and Producers
632‑010‑0167
Maximum Efficient Rate Hearings
632‑010‑0168
Use of Earthen Reservoirs
632‑010‑0170
Reservoir Surveys
632‑010‑0172
Operators to Assist in Reservoir Surveys
632‑010‑0174
Measurement of Potential Open-Flow of Gas Wells
632‑010‑0176
Supervision of Open-Flow and Pressure Tests
632‑010‑0178
Duration of Tests
632‑010‑0182
Gas to Be Metered
632‑010‑0184
Direct Well Pressure
632‑010‑0186
Gas-Oil Ratio
632‑010‑0188
Gas-Oil Ratio Surveys and Reports
632‑010‑0190
Gas Utilization
632‑010‑0192
Disposal of Brine or Salt Water
632‑010‑0194
Water Injection and Water Flooding of Oil and Gas Properties
632‑010‑0196
Gas Injection of Oil and Gas Properties
632‑010‑0198
Abandonment, Unlawful Abandonment, Suspension, Well Plugging
632‑010‑0205
Drilling Surety Bond
632‑010‑0210
Disposal of Solid and Liquid Wastes
632‑010‑0220
Measurement of Oil
632‑010‑0225
Spacing Plan
632‑010‑0230
Location of Wells
632‑010‑0235
Exceptions
Last Updated

Jun. 8, 2021

Rule 632-010-0010’s source at or​.us